ASTM B211-12
- standard by ASTM International, 01/15/2012
- Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
- Category: ASTM
$60.00
$30.00
Full Description
1.1 This specification covers rolled or cold-finished bar, rod, and wire in alloys (Note 1) and tempers as shown in Table 2.
Note 1 - Throughout this specification use of the term alloy in the general sense includes aluminum as well as aluminum alloy.
Note 2 - The term cold finished is used to indicate the type of surface finish, sharpness of angles, and dimensional tolerances produced by drawing through a die.
Note 3 - See Specification B221 for aluminum and aluminum-alloy extruded bars, rods, wire, shapes, and tubes; and Specification B316/B316M for aluminum and aluminum-alloy rivet and cold-heading wire and rods.
1.2 Alloy and temper designations are in accordance with ANSI H35.1. The equivalent UNS alloy designations are those of Table 1 preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E527.
1.3 A complete metric companion to Specification B211 has been developed-B211M; therefore, no metric equivalents are presented in this specification.
1.4 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.
TABLE 1 Chemical Composition LimitsA,B,C,D
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Bi | Pb | Sn | Other ElementsE | Aluminum | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Each | TotalF | ||||||||||||||
1100 | 0.95 Si + Fe | 0.05-0.20 | 0.05 | ... | ... | ... | 0.10 | ... | ... | ... | ... | 0.05 | 0.15 | 99.00 minG | |
2011 | 0.40 | 0.7 | 5.0-6.0 | ... | ... | ... | ... | 0.30 | ... | 0.20-0.6 | 0.20-0.6 | ... | 0.05 | 0.15 | remainder |
2014 | 0.50-1.2 | 0.7 | 3.9-5.0 | 0.40-1.2 | 0.20-0.8 | 0.10 | ... | 0.25 | ... | ... | ... | 0.15 | Product Details
Document History ASTM B211/B211M-19ASTM B211M-12e1ASTM B211-12e1ASTM B211M-12ASTM B211-12SAE AMSQQA225/1BASTM B211M-03ASTM B211-03ASTM B211M-02ASTM B211-99ASTM D2977-03Standard Test Method for Particle Size Range of Peat Materials for Horticultural Purposes (Withdrawn.. $26.00 $52.00 ASTM D1917-03Standard Test Methods for Rubber Property - ;Shrinkage of Raw and Compounded Hot-Polymerized Styrene.. $26.00 $52.00 ASTM D4804-03Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics.. $30.00 $60.00 |