ASTM D1429-13
- standard by ASTM International, 06/01/2013
- Standard Test Methods for Specific Gravity of Water and Brine (Withdrawn 2022)
- Category: ASTM
$64.00
$32.00
Full Description
1.1 These test methods cover the determination of the specific gravity of water and brine free of separable oil, as follows:
| Sections |
Test Method A-Pycnometer | to , |
Test Method B-Balance | to , |
Test Method C-Erlenmeyer Flask | to |
Test Method D-Hydrometer | to |
1.2 Test Methods A and B are applicable to clear waters or those containing only a moderate amount of particulate matter. Test Method B is preferred for samples of sea water or brines and is more sensitive than Test Method D which has the same general application. Test Method C is intended for samples of water containing mud or sludge.
1.3 It is the user's responsibility to ensure the validity of these test methods for waters of untested matrices.
1.4 The test method was tested at 22°C over a range, shown in , of 1.0252 through 1.2299; all data were corrected to 15.6°C (60°F).
Calculated Specific Gravity | Specific Gravity Experimentally Determined | ST | SO | % Bias | Statistically |
1.0247 | 1.0262 | 0.00145 | 0.00023 | −0.049 | yes |
1.0648 | 1.0665 | 0.0012 | 0.00019 | + 0.16 | yes |
1.1100 | 1.1119 | 0.0010 | 0.00034 | + 0.17 | yes |
1.2299 | 1.2235 | 0.0012 | 0.00037 | −0.52 | yes |
Product Details
Document History ASTM D1429-13ASTM D1429-08ASTM D1429-95(1999)ASTM E1073-91(1996)Standard Test Method for Obtaining a Pharmacological Profile with Mice.. $33.00 $65.00 ASTM E1059-91(1996)Standard Practice for Designating Shapes and Sizes of Nongraphite Counter Electrodes.. $29.00 $58.00 ASTM D4066-96ae1Standard Classification System for Nylon Injection and Extrusion Materials (PA).. $34.00 $67.00 |