ISA TR75.25.02-2000 (R2010)
- standard by The International Society of Automation, 01/01/2000
- Control Valve Response Measurement from Step Inputs
- Category: ISA
$260.00
$130.00
Full Description
-
This technical report applies to throttling control valves in closed loop control applications. The concept
has some application to open loop control applications. It does not address control valves used in on-off
control service. The "control valve" in the context of this document includes the following components:
- Valve: A valve is a device used for the control of fluid flow. It consists of a fluid containing valve body assembly, one or more ports between connection openings and a moveable closure member, which opens, restricts or closes the port(s) (see ANSI/ISA-75.05.01-2000, "Control Valve Terminology").
- Actuator: An actuator is a device that supplies the force and causes the movement of the valve closure member. Commonly these are fluid or electrically powered (see ANSI/ISA-75.05.01-2000). Actuators often use air but other types use electric, hydraulic and electro-hydraulic power.
- Motion conversion mechanism: A mechanism installed between the valve and the power unit of the actuator to convert between linear and rotary motion where required. The conversion may be from linear actuator action to rotary valve operation or from rotary actuator action to linear valve operation.
- Accessories: Additional devices used in the operation of the control valve. As described in ANSI/ISA-75.05.01-2000, typical examples include a positioner, transducer, signal booster relay, air set, snubber, etc.
Product Details
- Published:
- 01/01/2000
- ISBN(s):
- 1556177437
- ANSI:
- ANSI Approved
- Number of Pages:
- 40
