SSPC Paint 24
- standard by Society for Protective Coatings, 10/03/2016
- Latex Exterior Finish Coat for Steel Surfaces, Performance-Based
- Category: SSPC
$179.00
$90.00
Full Description
Scope has been broadened to allow use as DTM or as a topcoat over compatible primer (2004 version was a topcoat only)
Coating is suitable for exposure in Environmental Zones 2A (frequently wet by fresh water) and 2B (frequently wet by salt water) -- was formerly limited to interior and exterior normally dry exposures.
The standard is now a performance-based standard, including requirements for many performance properties not mentioned in the 2004 version.
Requirements for DFT of DTM finish coat and for DFT of finish coat plus primer (system) have been added.
Coating is suitable for exposure in Environmental Zones 2A (frequently wet by fresh water) and 2B (frequently wet by salt water) -- was formerly limited to interior and exterior normally dry exposures.
The standard is now a performance-based standard, including requirements for many performance properties not mentioned in the 2004 version.
- Composition requirements for Nonvolatile Vehicle and Total Solids by Volume have been removed.
-
Corrosion resistance and humidity resistance requirements have been added (rust, blistering, and undercutting after accelerated test cabinet exposure), replacing criteria for B 117 salt spray resistance
- Wet abrasion resistance has been removed
- Sag resistance now measured per D4400 not D2801
Requirements for DFT of DTM finish coat and for DFT of finish coat plus primer (system) have been added.
Product Details
- Published:
- 10/03/2016
- Number of Pages:
- 6
- File Size:
- 1 file , 140 KB
- Note:
- This product is unavailable in Ukraine, Belarus, Russia
Document History
